German
Spanish
French
Italian
Portuguese
Japanese
Korean
Arabic
Russian
Indonesian
Vietnamese
PRODUCT CATALOG
- Air-cooled Electric Vibration Shaker Testing Machine
- Water-cooled Electric Vibration Sharker Testing System
- Inductive Electric Vibration Table Testing System
- Vertical Extension Table for Vibration Testing Equipment
- Horizontal Slide for Vibration Testing Equipment
- Triaxial Vibration Test System
- Six-degree of Freedom Electrodynamic Vibration Testing System
- Electric Ejection Arrester Test Bench for Shock Vibration Testing
- Smart Power Amplifier for Vibration Test Table
- Pneumatic Vertical Shock/Crash Vibration Test Bench System
- Hydraulic Vertical Impact Vibration Test Bench Equipment
- Pneumatic Two-way Vertical Impact Test Bench for Shaker Testing
- Steady-state Acceleration Vibration Testing Bench Machine
- Hydraulic Vibration Test Bench for Hydraulic Vibration Shaker Testing
- Hydraulic Tilt and Swing Vibration Test Bench Equipment
| Name | FUJI VIBRATION STATIC CENTERING UNIT SHAKERS AMPLIFIER FOR VIBE TESTING |
| Rated thrust (sine): | 1kN |
| Rated thrust (random): | 1kN |
| Rated thrust (impact): | 2kN |
| Rated sinusoidal acceleration: | 980m/s2 |
| Rated random acceleration: | 784m/s2 |
| Vertical platform weight: | 65kg |
| First-order resonance frequency response: | 8500Hz（±5） |
| Shaker body size (LWH): | 330mm300mm330mm |
| Frequency range: | 5-10000Hz |
| Rated displacement p-p: | 20mm |
| Rated speed: | 2m/s |
| Quality of moving parts: | 0.8kg |
| Diameter of moving coil: | Ф85mm |
Product Description
FUJI VIBRATION STATIC CENTERING UNIT SHAKERS AMPLIFIER FOR VIBE TESTING
FUJI VIBRATION AMPLIFIER use linear bearings, in place of the more common suspension systems, to produce virtually zero axial stiffness and virtually zero mechanical damping. When combined with Data Physics’ linear amplifiers, operating in current mode, the resultant system force output will exhibit typically less than 1% electrical damping and the phase shift between drive current and force output will be typically less than 1°.
Compatible with the entire range of FUJI VIBRATION modal exciters, this unit serves two different purposes depending on which exciter is connected.
When paired with FUJI VIBRATION-4827 or FUJI VIBRATION-4828, the unit provides variable stiffness to the armature suspension and correctly centres the armature in relation to both the exciter’s housing and to the device under test (DUT) in order to ensure it is in the zero position.
Alternatively, when paired with FUJI VIBRATION-4824, FUJI VIBRATION-4825 or FUJI VIBRATION-4826, the unit applies electrical pre-tensioning force to the tension-wire stinger linking the exciter and the input transducer attached to the DUT.
Send Email
WhatsApp
008615151709352